product description:
SB-118 is a vented single 18-inch high-power subwoofer designed for the requirements of a variety of high flow or fixed installation speech and music sound reinforcement application areas.
Product details:
SB-118 consists of a coil diameter of 4 inches (100mm) of 1200 watts of power in a single 18-inch woofer composition subwoofer, with relatively small volume of the box for easy installation and display a variety of environments. Case selection of high-quality high-density 18mm birch plywood production, to minimize large dynamic state resonance box; in order to obtain a lower nonlinear distortion and low-frequency limit, better low frequency flexibility and higher output, and unit cabinet design into a new concept and technology, environmentally friendly water surface with black multilayer waterproof fire-retardant paint, wiring board after two parallel Neutrik NL4MP socket, hexagonal steel mesh hole with a special sound-permeable mesh, to ensure the sound under the effective transmission, it provides better protection unit.
Frequency Response | +/- 3dB |
Horizontal directivity (-6dB) | N / A |
Vertical directivity (-6dB) | N / A |
Drive | LF 18 "/ 4" B & C |
Power handling (RMS) | 1200W |
Nominal Impedance | 8ohm |
Sensitivity (1W / 1m) | 102dB |
The maximum sound pressure level (calculated) | 134dB |
Crossover | N / A |
Connectors | 2x 4-pin Neutrik speakon |
Rigging | N / A |
Case Material | Birch plywood (18mm) |
Surface treatment | Water paint |
Protection grille | Black epoxy perforated steel with nylon cioth |
Dimensions (W × H × D) | 530x710x570 (mm) |
Weight | 42KG |