product description:
X Series amplifiers, X series is a professional pure power amplifiers specifically for KTV and small sound reinforcement design, stability, wide frequency response, low distortion sound speaker protection circuit, to meet the high demand for quality people PA needs.
Product details:
X Series dual-channel amplifier belonging to the best choice of professional high-fidelity sound system, now represents the high-end amplifiers on the market, superior linear power supply system, with plenty of power reserve, several optimized circuit design and carefully selected worldwide each kinds of high-quality original device, ensuring low distortion amplifier fidelity sound reduction. With a sound amplifier and audio protection circuits, including inhibition switch machine impact, infrasound, ultrasound, RF; load short circuit, overload, overheating, clipping limit protection; and DC fault load protection, so that the entire PA system prolonged high dynamic security operation to provide effective protection; unique cooling system design improvements, increased by 30% effective heat dissipation, cooling air flow through the filter dust cover after only need a heat sink, at the same time enhance heat dissipation, avoiding dust and smoke circuit boards and other pollution caused by machine failures, and make the amplifier remains active room temperature.
Output power (EIA1KHz 1% THD) Stereo 8Ω | 600W + 600W |
Output power (EIA1KHz 1% THD) Stereo 4Ω | 900W + 900W |
Output power (EIA1KHz 1% THD) bridged 8Ω | 1800W |
Output interface | 2 Speakon for Stereo & Bridge Output |
Frequency response | 20Hz-20kHz |
Input sensitivity | 0.77V |
Balanced input impedance | 20kΩ / Balanced |
SNR | ≥95dB |
Distortion | ≤0.03% |
Rated output power of separation 8 OHM 1kHz | > 70dB |
Damping factor f = 1KHz 8 OHMS | > 240 |
Slew Rate | 15V / uS |
Protection | Soft Start |
Cooling system | Two steps speed fan |
Power Supply | AC 220-230V 50Hz / 60Hz |
Weight (kg) | 16.5Kg |
Dimensions (WxDxH) -mm | 482 × 460.5 × 88 |