product description:
HLS-218 is a vented dual 18-inch high-power subwoofer, with full-frequency or high-frequency use. Designed for a variety of flow or speech and music sound reinforcement applications where a fixed installation. HLS-218 consists of two coil diameter of 4 inches (100mm) of the 1200-watt high-power ultra-low frequency of elements of a single 18-inch subwoofer, with relatively small volume of the box for easy installation and display a variety of environments. Case selection of high-quality 18mm high density birch plywood manufacture, minimize large dynamic state resonance box; in order to obtain a lower nonlinear distortion and low-frequency limit, better low frequency flexibility and higher output, and unit cabinet design into a new concept and technology, environmentally friendly water-surface mining multilayer black waterproof paint, wiring board after two parallel Neutrik NL4MP socket, hexagonal steel mesh hole with a special sound-permeable mesh, in ensuring the effective transmission of sound case, provides better protection unit.
Type | dual 18 "vented subwoofer |
Frequency Response +/- 3dB | 35Hz-500Hz |
Horizontal directivity (-6dB) | N / A |
Vertical directivity (-6dB) | N / A |
Drive | 2X18 "cone |
Power handling (RMS) | 2400W |
Nominal Impedance | 4 ohms |
Sensitivity (1W / 1m) | 103dB |
The maximum sound pressure level (calculated) | 138dB |
Crossover | N / A |
Connector | 2 Neutrik Speakon wired in parallel |
Rigging | N / A |
Cabinet material | 18mm multilayer birch plywood |
Finish | water-based paint floating point |
Protection grille | perforated steel surface dusting |
Dimensions (W × H × D) | 1065mmX560mmX800mm |
Weight | 90KG |